Ingun MA 2111/D/H/S-5 Test Fixture Base

The INGUN MA 2111/D/H/S-5 (INGUN item 31730) is the smallest desk-housing base in INGUN's MA 21xx manual fixture range. A parallel closing drive brings the pressure frame straight down onto the DUT, so probe travel and contact force stay repeatable cycle after cycle, and the board-specific tooling sits in an ATS MA11 exchangeable kit that drops in without tools.

With a 150 × 240 mm useable area and five internal interface blocks it is the right starting point for small and medium boards where a 285 mm-wide MA 2112 would be mostly empty space — same 2,000 N contact force and same probe geometry as its larger siblings, in a smaller and lighter housing. Choose the /HG variant instead if you need the taller high-desk housing for more room underneath.

• Useable area 150 × 240 mm standard and ESD; 100 × 160 mm radio frequency
• Max. contact force 2,000 N; approx. parallel contact stroke 15 mm
• Up to 850 interface signals across 5 internal interface blocks; test system interface not pre-wired
• Single-sided (bottom) contacting; dual-stage and a top contacting unit (ZSK) available as options
• Test probe installation height 10.5 mm bottom / 16 mm top; 58 mm free space above the PCB
• Takes the ATS MA11, ATS MA11/ESD and ATS MA11/HF/AL/ESD exchangeable kits
• Desk housing; outer dimensions closed 320 × 515 × 270 mm; 9.3 kg